Home maintenance and DIY projects almost always include carpentry, electrical works, and plumbing.
Beginner or not, this means you will need to use several tools to make the job easier.
When building your collection, the best place to start is identifying all the must have power tools for home DIY.
Power tools are not cheap, but you can save some money by choosing the correct ones for your projects.
Top 10 Power Tools for Home DIY Projects
With so many tools out there, how do you know which ones to get for home improvement and maintenance tasks?
Here are some of the most important power tools you need to make each task more manageable.
1. Circular Saw
Since its inception in the 1700s, the circular saw’s ease of use has made it useful in a wide range of applications.
The circular saw is likely the most widely used power saw in today’s world.
In fact, you might notice that it is always present in do-it-yourself home repair tasks and professional building projects.
It’s highly versatile because it can cut a variety of materials, including metals, wood, brick, cement block, fiberglass, and even plastics.
The circular metal blade with sharp teeth makes all of this possible, producing clean cuts as it spins at high RPMs.
You can mount a circular saw onto a table or use it with other portable equipment.
To use one, simply set the saw to the correct height and depth and align it to the position of where the cut should happen.
Then, push the saw to glide it through the material, but make sure you’re not pressing too hard.
2. Power Drill
Like a circular saw, power drills are another essential piece of equipment for home improvement projects.
You use smaller bits to drill tiny holes for simple projects, while the bigger ones can carve holes up to five inches in diameter.
Alternatively, you may use a power drill with a driver bit to install screws straight into wood or concrete.
While a power drill is an excellent tool, its high force may also result in improperly drilled holes, shattered or dulled bits, and even injuries.
However, when used correctly, you will quickly realize its importance.
With a power drill, you should be able to complete drilling tasks in significantly less time than you might expect.
A jigsaw is an essential tool in any DIY arsenal since it is small, compact, and portable.
Basically, this saw utilizes a reciprocating blade to make unusual cuts and curves in wood, metal, or other materials.
The device is one of the power tools you may use at the workstation or at a remote location where the job is.
Cables and wall outlets powered jigsaw models in the past, but cordless jigsaws are now increasingly becoming popular.
While you may think of it only as wood-cutting equipment, you can also use it to cut other materials like tiles and carpet.
4. Air Compressor
Believe it or not, an air compressor is a valuable tool for do-it-yourself projects.
You can use it as a spray gun, which will allow you to paint on a surface, like the panels of your car, with ease.
It also works great as a nail-gun combo, so putting up boards or framing the threshold is much easier than when using a traditional hammer.
Removing sawdust and other debris from your workspace is also a common application for this tool.
Yes, you can also use your air compressor for your DIY cleaning projects.
By attaching a sprayer, you can utilize your air compressor to remove dirt from walls, windows, vehicles, driveways, and other surfaces.
Thanks to this, you’d be able to get rid of stubborn dirt without wasting too much water and cleaning solution.
5. Nail Gun
Depending on how much nailing you need to accomplish, a traditional hammer can become too tiresome to use, slowing your progress and draining your energy.
That’s why a nail gun belongs to any must have power tools for home DIY list.
A nail gun produces pressurized force to allow you to drive a nail into a surface with a single pull of the trigger.
On the other hand, a hammer would require at least some powerful hits to achieve the same results and would require more energy.
Safety is also one of the downsides of using a hammer.
As you can imagine, a wrongly calculated swing could be disastrous for your DIY project or yourself.
A nail gun is much safer and faster, as it can do the job within a couple of seconds without the need to hit the nail’s head manually.
Even a veteran carpenter’s speed cannot compete with the efficiency and accuracy of this power tool.
6. Belt Sander
Belt sanders are widely used for sanding rough surfaces, smoothing wood panels, shaving to a scribed line, and freehand shaping.
They are outstanding in quick wood removal because they use a significant amount of power for handling coarse grits.
Furthermore, the sanding motion of this tool is linear, so you may sand with the grain and still produce a smooth-looking finish.
In general, belt sanders are regarded as one of the most recommended portable power tools in the market for smoothing and leveling uneven boards.
7. Impact Driver
To appreciate the importance of an impact driver, it’s important to understand the functionality of a drill first.
A drill’s principal function is to push screws into materials.
This is made possible by the motor’s rotating force and the pressure from your fingers.
As you probably already know, a drill is sometimes unable to penetrate thick or hard objects.
With a two-pronged approach, an impact driver is designed to handle the issues of these exceptionally tough surfaces.
They have motors that provide higher torque than drills. At the same time, they use an impact action to push screws through more stiff materials when loaded.
A standard drill will be sufficient if you need to make holes and fit a small-sized screw.
However, consider purchasing an impact driver if you plan to renovate your garage, assemble a garden shed, or do any other similar work.
Using the tool will substantially save you time while providing you with the satisfaction of effortlessly punching huge screws into hardwood.
Keep in mind that if you are using an impact driver, take the necessary safety measures, just like with any other power tool.
8. Biscuit Joiner
Unlike the other woodworking power tools specializing in cutting, a biscuit joiner connects the wood.
It produces smooth, impeccable edges essential in making furniture, cabinets, shelves, and other wood products.
While it is known for its wood-joining capability, a biscuit joiner can also cut. It makes slots that are essential in completing the joint.
Of course, it is not capable of doing the task without the assistance of additional tools, including glue and clamps.
Overall, biscuit joiners are a useful DIY woodworking tool that will save time when you’re trying to carve out ideal slots.
Although you can create accurate cuts without the help of this powerful tool, it does speed up the process.
Some models even feature dust collection to keep your working area from becoming too dusty.
9. Heat Gun
DIYers in the home frequently utilize a heat gun to accomplish a range of small and big projects.
You can use it to unfreeze frozen pipes, scrape the old paint and faded wallpaper during renovation, remove old upholstery, and many other common applications.
Heat guns are also helpful in eliminating all sorts of adhesives, including those that have been clinging to your walls for years.
One significant benefit of heat guns over others is that they don’t use any flame to do their work.
As you may know, flames, even in small doses, are very capable of ruining the surface you’re working on.
A lathe is a type of power tool usually used to shape metal or wood.
If you enjoy watching DIY videos, you’ve most likely seen how this piece of machinery works.
A lathe serves its purpose by making the workpiece rotate around a fixed cutting tool, making it significantly easier to modify.
Regardless of the type and purpose, lathes always use the holding and rotating system.
When it comes to functions, very few could compete with a lathe because it is capable of drilling, shaping, sanding, turning, cutting, and many others.
This level of applications in a tool is difficult to match.
As such, several amateur and pro workers rely on lathes in the majority of their projects.
A DIYer’s Dream
While these tools are considered a fixture in many DIY workshops, it doesn’t necessarily mean that you have to own each one of them.
It’s essential to plan for every step of your upcoming projects to figure out the must have power tools for home DIY, not the other way around.
Remember that some of these pieces of equipment cost hundreds of dollars, so analyzing your materials and available tools is critical.
Also, besides power tools, you should invest in hand tools because they are just as important when it comes to DIY.